Specifications and Features:
Full depth cutting capacity:
(with Hitachi M12VC spindle and brygga electronics set)
• 3/4" baltic birch plywood with 1/4" bit at 120 IPM.
• 1/8" 6061 aluminum with 3/16 bit @ 10 IPM.
Specs:
• X: 49", Y: 49" or 73" or 97", max. Z height: 16":
• Accuracy: 0.005" or better.
• Repeatability: 0.001" or better.
• Footprint: 71" in width by 62" or 86" or 110" in length.
• Available in: 4' x 4' or 4' x 6' or 4' x 8' configurations.
• Available for Nema 23 or Nema 34 size stepper motors.
Nema 23 size: Rapids up to 750 IPM, feedrates up to 250 IPM.
Nema 34 size: Rapids up to 1100 IPM, feedrates up to 500 IPM.
Features:
• CenteRail embedded v-rail linear motion system with cold-drawn steel rails.
• Integrated primary belt drive system.
• Secondary rack & pinion drive system.
• Constant pinion to rack gear pressure.
• Spindle mount with 3-1/2" effective clamp height.
• Same engagement angle of stepper thrust on the carriages in either direction.
• Fully integrated electronics set with Nema 23 size steppers, 3-Amp unipolar
drivers and SuperPid spindle control available.
brygga, bryggaCNC and CenteRail are trademarks of bryggaCNC, a California company.
bryggaCNC reserves the right to make modifications or substitutions without notice. See Terms and Conditions
Designed and Manufactured in the USA
bryggaCNC - All rights reserved - Copyright 2016 - Centerail - Patent pending - Copyright 2016
SPECS
3/4" BB Plywood
1/8" Aluminum
14" Cube
Symmetrical gear angle